Below are new or revised snippets in the last thirty days.

ranking Sort Sort   |   date Sort Sort   |   member Sort Sort

« Previous 1 2 3 4 5 6 7 8 Next »
Date Submitted Mon. Jul. 24th, 2017 6:06 AM
Revision 1
Syntax Master autlmycar
Tags Launch | Pro | V | x431
Comments 0 comments
For many years, Metro Wheels has struggled with how to remove the painted or powder coated surface of wheels. With the demand to provide high quality launch x431 v pro, it became an absolute necessity in our wheel repair and refinishing plant.

We purchased a large blaster and tried to remove the surface that way. It does remove the finish, but leaves the wheels pitted, which requires a lot of sanding and labor to make it smooth again.

We tried using various heat sources before blasting and, although it did help - a little - we still were not satisfied. The risk of using fire in the shop did not appeal to me, and the tanks for the flame were pretty costly.

The original process entailed:

1. Removing all wheel weights and valve stems

2. Placing the wheel into the blaster cabinet for about 10 minutes

3. Removing the wheel from the blaster after it cooled down

4. Placing the wheel into a second blaster. This upright manual blaster covered the hard-to-reach areas and corners, but could take an hour or more per wheel to complete. Because this system uses expensive acrylic blasting beads, it was costly as well as time-consuming.

5. Moving the wheel to the structure department.

It was the perfect opportunity to think outside the box of what has traditionally been done, so I invented something that's worked out well, boosting our production times and my workers really like it.

For many years, we avoided using chemicals because of the smell, disposal issues, and mess it can create, not to mention the possibility of chemical burns with some products can create. We also couldn't find a safe, acceptable way to completely submerge the wheels. Our only thought was to wear heavy gloves while inserting and removing wheels from a tank system. As you know, this simply would not do. The danger of getting the chemical on the skin or in the eyes was just too great.

So I began to sketch out what I thought would work and came up with a system that can safely dunk 3 wheels (up to 20") at a time into a chemical that completely strips all the paint and powder coat. This chemical has a slight odor, but is tolerable. The system uses:

A large polypropylene tank,

A system to dunk the wheels into the tank,

Air agitation, and

The chemical, which needs to be heated and filtered.

Once we started using the system, the gentleman in charge of the blasting became very excited about how easy production was now, mostly because his personal effort was cut in half.

Metro Wheels' new dunk system dramatically improves our timeframe for delivery, which makes for happier wheel repair customers. The chemical softens the paints launch x431 v+. After the chemical dries, our dunk process allows the automatic blaster to quickly remove all paints and powder coats. This virtually eliminates the need for any manual blasting.

This system will quickly pay for itself in the added production to the wheel plant. Perhaps you could provide the service in an area that is currently not being done, or you could use additional production in your wheel repair plant.

Tim Gowens is owner of Metro Wheels and Accessories Inc. - providing alloy wheels and wheel repair. If you'd like to learn more about our dunk system, please contact Metro Wheels to see how we can build a system at your site.
Related Links
Date Submitted Mon. Jul. 24th, 2017 7:56 AM
Revision 1
Syntax Master lisapeter
Tags "A12-180P1A" | "ac adapter" | "chicony A12-180P1A"
Comments 0 comments
New Replacement For Chicony A12-180P1A 19.5V 9.5A 150W AC Power Adapter With Power Cord
Replacement For Chicony AC Adapter A12-180P1A A120A010L 150W Power Supply Charger.The high quality laptop charger for Chicony A12-180P1A provides your laptop with safe and reliable power.It is over Charge protection, Voltage protection

Input: AC100-240V
Output: DC 19.5V-9.5A
Power: 150W
Connecter size: 5.5*2.5mm
Item Includes: Laptop AC Adapter and Power Cord For Your Country
Date Submitted Tue. Jul. 25th, 2017 7:35 AM
Revision 1
Syntax Master axcartool
Tags Autel | car | diagnostic | ds808 | maxidas | tool
Comments 0 comments
I simply do not know what I probably would do without my little car. It is not especially big or overly high-priced however it suits my requirements. Okay, my car might have a bumper sticker on the back stating that my other vehicle is a Porsche, and even though everyone else on the road appreciates it's a tall tale and extremely unlikely to be legitimate, I actually adore my little vehicle to pieces and wouldn't swap it for the world.
Another reason I adore my automobile is the fact that it's an economy model and very affordable to own. Even though fuel tank is nowhere near as large as that of a four wheel drive, for example, it costs me significantly less to fill up the tank because, not merely is the tank smaller sized but the auto additionally makes use of less petrol than a bigger car would. The vehicle body is compact and light-weight and due to the fact it's a 1 Car Diagnostic Tool. 3, and it uses less gas to pull away than let's say a 16-valve. Not simply are the operating costs not as much, maintenance of cars like my own costs less as well. Oh, and it's also a great deal cheaper to change the tires on my car when compared to a lot of bigger automobiles with more torque. Furthermore, insurance coverage is not as much on my vehicle at the same time as it falls into the 'economy' grouping. Insurance companies think that a less expensive vehicle is cheaper to repair and therefore often charge drivers of economy cars a smaller amount for their insurance cover.
Because I am a woman I treasure the manoeuvrability of my small vehicle. I love the certainty that I can park in smallish places and make a 3-point turn on a penny, so to say. I don't like operating my husband's vehicle for this reason and definitely will take my car over his any time due to compactness provided by the smaller wheel base. Furthermore,I favor my vehicle above my husbands' as it's a hatchback rather than a sedan similar to his. I have not been keen to drive it since I clipped the side of the back fender on the edge of the stone flower box beside the drive one time. Although it had been a tiny scrape and my husband was able to re-attach the bumper where it became unclipped due to the impact, I didn't enjoy the feeling of the proportions of the car being greater than what I was used to Autel Maxidas DS808. Of course I could easily get used to having a boot sticking out at the back but offered the choice I'll stick with my hatchback, thank you very much!

For more information about a vehicle visit the website
Related Links
Date Submitted Tue. Jul. 25th, 2017 8:22 AM
Revision 1
Syntax Master autosuma
Tags Autel | ds808 | maxidas | MaxiSys
Comments 0 comments
The moped is a form of motorized scooter or bicycle that does not move as fast as a motorcycle or motor vehicle but still gets the job done. Mopeds are popular in the United States and all throughout Europe. Most mopeds are built having two to three wheels, some have human powered pedals combined with a motorized engine, which in turn is called a Hybrid Moped. Some moped laws do not require the same driving age as motorcycles and other motor vehicles so mopeds have become wildly popular among the youth of Europe and the United States.
The moped did not become popular in the United States until the mid-1970s. Most states within the country had different restrictions and laws against mopeds which prohibited them from being used on open roadways for public transportation instead of normal motor vehicles Autel MaxiSys. Mopeds, in their early days, had incredibly small engines and did not create enough power to exceed more than 40 miles per hour. Despite the low amount of speed mopeds were known for their fuel efficiency.
Once the fuel crisis began to wane and vehicle manufacturing companies began offering newer, more fuel efficient cars, the moped's popularity began to fade and they almost became irrelevant on the roadways of the United States Autel Maxidas DS808. There are still moped clubs and associations across the country that are devoted to promoting mopeds and their effectiveness and usefulness on the roads. Those clubs are the Moped Army and the Moped Riders Association. The latter is an international association that is dedicated to sharing information among riders and scheduling riding events across the world.
Moped drivers have to follow all the same rules and regulations that other motor vehicle drivers have to follow and are subject to the same fines and penalties that all other drivers are subject to when breaking the law or driving illegally on the roads.

Car Rental High Point Rent Car High Point
Related Links
Date Submitted Fri. Jul. 7th, 2017 3:14 AM
Revision 1
Scripter batteriesshop2
Tags Doll | Love | sex | silicone | xxdoll
Comments 0 comments

Have you tried a variety of sexy sex dolls? Have you tried sex dolls? They are one of the most popular sex toys in the modern times, which are available in a variety of price range. You can also buy it in a plethora of materials. Usually, the cheap sex doll is composed of welded vinyl and is normally inflatable. One of the biggest advantages of this sex toy is their wide availability as they can easily be bought from a variety of online or land-based shops. Importantly, as the doll is available in a variable price range, you can choose the one which is available in your budget. However, cheap dolls are made up of inferior materials, which lessen their durability and may not be suitable for intense sexual actions.

To extend the life period of the sex dolls, it is a must to take proper care of the doll. Besides, the doll must be washed before and after usage as any other sex toy. In fact, you can even try the blow up dolls, composed of vinyl having well defined features and a seamless body for a wonderful sex experience. In fact, the vinyl sex dolls are much cheaper and last for a long period. You would be pleased to know that these dolls have realistic legs, breasts and even hands. In fact, they can sit in different poses with bended legs and hands. Nevertheless, many inflatable sex dolls are composed of latex, which is a smooth and soft material intimidating human body.

The Sex Dolls can be used as a sex partner having functional genitals composed of silicone, gel, latex, and cyber silicone. The doll even has a gap imitating the vagina or anal orifice. In addition, if you are fond of oral sex, it has a mouth imitating the oral sex posture. Many dolls are equipped with an imitating tongue or even a vibro massager for a wonderful sexual experience. The vibro massager can provide additional pleasure and stimulation to the genital organs while using them. In fact, you can even buy the vibro massager separately in various forms from oviform to penis. It can be used for vibration and rotations providing an erotic experience.

While using the blow up doll, inflate the sexy sex dolls completely till they achieve an elastic state. Avoid inflating it too much otherwise it might rupture or explode during usage. As the dolls are capable of taking only up to a certain amount of pressure, it is recommended to use the sex dolls in poses which reduce excessive pressure on it. Before using it for the first time, wash it thoroughly with an antiseptic. In fact, if you are keen about your health, it is recommended to use the doll along with a condom. However, before using it, do not forget to use a water-based lubricant before using it. You will have a wonderful sex experience with these dolls. So don't waste any time and order a sex doll now.

Article Source:

138cm Selena Sex Love Doll Silicone Entity Body Lifelike Sex Real Solid Love Toy


138cm 4.53ft Silicone Sex Doll with Metal Skeleton Lifelike Sexy Toy


« Previous 1 2 3 4 5 6 7 8 Next »