Navigation Home / Tags / to

ranking Sort Sort   |   date Sort Sort   |   member Sort Sort
Syndication

« Previous 1 2 3 Next »
1
Date Submitted Wed. Apr. 16th, 2014 6:22 PM
Revision 1
Scripter autelds708
Tags Autel | How | Oil | Reset | to | tool | update
Comments 0 comments
Yet despite large returns, these stocks remain cheap relative to the SP 500. All three have seen stock gains greater than 60% over the last year, but with the exception of Toyota, both GM and Ford are trading near even since January 2011. Meanwhile, the SP 500 has rallied with gains of 26% in the same period. ¡°You just get such joy about people coming up to your car and reminiscing about the cars they had or someone talking about a tech issue they¡¯re having and being able to help them with it,¡± he said. ¡°But our club¡¯s M.O. is raising money for local charities, and that¡¯s the real reason we¡¯re out here.¡± Hundreds of chemical engineering students - including some from UC Berkeley and San Jose State - spent Sunday afternoon in San Francisco mixing chemicals, checking circuits, and watching anxiously as their small cars, powered by alternative fuel, sped or sputtered toward the finish line. £¼ The driver, Sukhen Dey, will be produced in court on Saturday, police sources said. ¡°I was under the impression that I had Rs. 6 with me when I got into the auto. But I did not realise that I had spent that money and I was left with only a Rs. 50 note in my pocket,¡± said Roy, who is a resident of Dum Dum. There has been much discussion about consumers free spending ways of the past. Certainly, there is some truth to the notion that easy credit and optimism (from rising stock market and/or real estate prices) can spur spending. When we examine past motor vehicle spending, we can see this effect. The 23-year-old singer was involved in a car crash this afternoon and totaled his vehicle, but escaped uninjured, E! News confirms with the Beverly Hills Police Department. He was alone in the car. Brown told officers on the scene he was being chased by paparazzi before the accident.
1
Date Submitted Wed. Apr. 16th, 2014 11:17 AM
Revision 1
Helper johansonkatherine
Tags bookmarks | conversion | jpeg | pdf | to | XML
Comments 0 comments
This code shows how java developers can change color space of PDF document from RGB color to CMYK and vice versa by using Aspose.PDF for Java Library. The following methods have been implemented in the Operator class for changing colors. Use it to change some specific RGB/CMYK colors to CMYK/RGB color space, keeping the remaining PDF document as it is.

• com.aspose.pdf.Operator.SetRGBColorStroke.getCMYKColor(new double[3], new double[4])
• com.aspose.pdf.Operator.SetRGBColor.getCMYKColor(new double[3], new double[4])
• com.aspose.pdf.Operator.SetCMYKColorStroke.getRGBColor(new double[4], new double[3])
• com.aspose.pdf.Operator.SetCMYKColor.getRGBColor(new double[4], new double[3])
1
Date Submitted Mon. Apr. 14th, 2014 10:19 PM
Revision 1
Coder myautel
Tags Autel | How | to | ts401 | use
Comments 0 comments
a rotary-type (for example, a rotary vane pump ), a lobe pump similar to oil pumps used in automobile engines, or a helical twisted Roots pump . Roots-type pumps The low pulsation rate and gentle performance of the Roots-type positive displacement pump is achieved due to a combination of its two 90¡ã helical twisted rotors, and a triangular shaped sealing line configuration, both at the point of suction and at the point of discharge. This design produces a continuous flow with equal volume. High capacity industrial "air compressors" have been designed to employ this principle as well as most "superchargers" used on internal combustion engines. MaxiTPMS TS501 Scanner NICEVILLE ¡ª The 6-inch-tall vehicle made a turn and traveled a few more inches before sweeping perfectly into a parking space. [ Life ] For those who may have forgotten or who need a quick refresher on the terrible things that have happened this year, despicable, disgusting human being Ariel Castro held three women captive in his house, where he did unspeakable, horrible things to them for ten years. They were finally freed after one of the women, Amanda Barry, made a daring escape and was rescued by a charming fellow named Charles Ramsey , who briefly captured the internets attention with his off beat charm and mannerisms. Castro was arrested and charged , but died (either due to suicide or auto erotic asphyxiation) before he could face his sentence. Autel MaxiCheck DPF Car seat heaters are great accessories, especially if you live in a cold climate and you have to drive, each morning, your freezing car. Youre probably familiar with the scenario: you wake up in a cold winter morning, you get in the car and you drive to your workplace. Its freezing inside the car and it will be freezing for a while, because the car heating starts working only after the engine is warm enough. When its 10 degrees Fahrenheit outside, youll probably have to drive for 10 miles before the interior of the car to start warming up. And it will be another 10 miles to reach to a comfortable temperature. Car seat heaters save you from all that trouble. They start warming your body from the moment when you get inside the car and youll be able to drive comfortably from all the way.Auto buyers used to collect the hard-copy auto loan application form for filling up the same and submitting personally by traveling wherever the 'brick and mortar' office of the lender was situated. The task was tiresome and time-consuming. It required you to spend money and your energy in completing the application procedure. The online process of new or used car loan application is less complicated and user-friendly. You simply need to visit a lender's website, click on the auto loan application button to access the form. You take your time to fill up the mandatory personal and work information as asked for, and then submit the form for processing purpose. Launch X431 Pro The Volt, on the other hand, can be driven like a conventional automobile on battery power, adding (in our opinion) to its appeal. Getty "I'm addicted to Prada!" says Victoria. Hmm what about if Prada (above) make trackpants? Getty Mmm car-related arm candy at Prada... See more about the tributes in our sister paper the Daily Post Tributes to two soldiers killed when car smashes into tree near Army base
1
Date Submitted Fri. Apr. 11th, 2014 3:34 PM
Revision 1
Scripter autelmd802
Tags Autel | ds708 | How | maxidas | to | update
Comments 0 comments
Sony Ericsson K550 auto-focus didnt prove itself as that much reliable but that may be due to the fact that our test phone is a beta version and not a final product. The auto-focus comes with a macro mode as an option which comes in handy when shooting closer objects. -|-">-|-]-}-|--|-[/link]-}
1
Date Submitted Thu. Apr. 3rd, 2014 7:13 AM
Revision 1
Helper johansonkatherine
Tags new | Ruby | split | to | Using | Workbooks | Worksheet
Comments 0 comments
Cloud Developers can now use ruby language to split excel workbook into single worksheets and save all or specific worksheets as new workbooks, TIFFs or other images format by using Aspose.Cells for Cloud API. To split workbooks, you need to upload the input Excel files to Aspose for Cloud or any supported third party storage and then send a POST request to the Aspose for Cloud service.

The following REST example uses the RestClient library to send HTTP requests and handle HTTP responses so you need to install RestClient to use these examples. You can use the URI to split a workbook from Aspose for Cloud or any supported third party storage.

Use following optional parameters with the above URI. All or specific parameters can be used according to your requirement. If no parameter is specified, then all worksheets are split to the specified format.

• storage – Used to set the storage name if you are using third party storage.
• folder – Used to set the name and path of the folder where the input file has been uploaded.
• from – Used to set the start page number if you are splitting specific pages.
• to – Used to set the end page number if you are splitting specific pages.

After building the URI:

1. Set the App SID and App Key and sign the URI.
See section 1 of the code and the Sign URI method for more details.
2. Send a POST request to the Aspose for Cloud service.
See section 2 of the code for more details.
1
Date Submitted Thu. Mar. 27th, 2014 7:27 AM
Revision 1
Helper johansonkatherine
Tags Convert | Image | MemoryStream | pdf | to
Comments 0 comments
This technical tip shows how developers can convert MemoryStream image to PDF file inside their Android application. The Image class in Aspose.Pdf makes it possible to convert an image from various sources into PDF format. This may include an image from particular location over the hard-drive, an image from MemoryStream or an image at a web location. The ImageInfo class has a method named setMemoryData() which is used to specify MemoryStream as the image source.
0
Date Submitted Tue. Mar. 11th, 2014 7:47 AM
Revision 1
Helper johansonkatherine
Tags "1080mAh" | Convert | Files | Image | OneNote | to
Comments 0 comments
Aspose has released new API for working with Microsoft Office OneNote (.one) file formats known as Aspose.Note for .NET API. It allows developers to work with ONE (2010/ 2013) files in ASP.NET web applications, web services and Windows applications. It allows developers to open files & manipulate elements of OneNote books & export them to PNG, GIF, JPEG, BMP and PDF formats. The API is quite simple and developers can use it in application easily.
0
Date Submitted Mon. Nov. 11th, 2013 10:38 AM
Revision 1
Syntax Master claireling
Tags cable | fiber | LC | optic | pigtails | st | to
Comments 0 comments
Much in regards to the tech jargon, some individuals have no idea its meaning. Including fiber optic pigtails, fiber pigtail can be a bit of fiber optic cable with only one fiber optic connector on the one hand of the cable, you can find single mode and multimode fiber optic pigtails, which can be with some other types of fiber optic terminations including SC, FC, ST, LC, MU, MT-RJ, MTP, MPO, etc. the fiber optic pigtail with connector side is used to link the gear, while the other part of the pigtail is melted along with the fiber cable, by melting together the fiber glasses, it may reach the absolute minimum insertion loss. Fiber optic pigtails are usually used in combination with fiber optic management equipment like ODF, splice closures and cross cabinets. Common forms of fiber optic pigtails are generally with 0.9mm fiber cable diameter, in most cases installed inside ODF unit. Mostly used types are SC fiber optic pigtail, ST fiber optic pigtail,FC fiber optic pigail, LC fiber optic pigtail ,MT-RJ fiber optic pigtail,SC/APC fiber optic pigtail, FC/APC fiber optic pigtail and E2000 fiber optic pigtail. They may be single mode types and multimode types.

A fiber pigtail is really a single, short, usually unbuffered, optical fiber that have an optical connector pre-installed on a single end and also a period of exposed fiber within the other end. The end of the pigtail is stripped and fusion spliced one fiber of a multi-fiber trunk. Splicing of pigtails to each and every fiber within the trunk "breaks out" the multi-fiber cable into its component fibers for connection to the conclusion equipment.Fiber pigtails may have female or male connectors. Female connectors might be mounted in the patch panel, often in pairs although single-fiber solutions exist, to allow them to get in touch to endpoints or any other fiber runs with patch fibers. Alternatively they can have male connectors and plug into an optical transceiver.As the fibers will need to have connectors fitted before they are able to put on other equipment. Fiber pigtails is usually the common solutions for fiber cable termination, the inclusion of connectors to each and every optical fiber in a cable.

Based on the ITU-T (International Telecommunication Union Telecommunication) standardization organization, fiber optic pigtails are sorted into Fiber pigtail that conforms to G.652 and G.653 fiber splicing technology standard. Fiber optic splicing technology is primarily to use a fiber splicing machine to fuse splice the fiber with fiber or even the fiber with fiber pigtails. Within this process, the bare fibers with the fiber optic cables are fuse spliced with the fiber pigtails to become a whole. With the fiber optic connector on one side with the fiber pigtails, they are linked to fiber optic transceivers, the optical fibers associated with the twisted pairs, then connect to the information outlets. Main tools utilized in the fiber splicing technology include fiber termination box, fiber optic converter, fiber optic transceiver, fiber pigtail, optical fiber coupler, fiber stripper, and fiber optic cleaver, etc. Currently fiber optic pigtail with SC, ST, FC, LC MT-RJ, SC/APC, FC/APC, E2000 fiber optic connectors are available in the marketplace.

FIBERSTORE INC. give a full range of fiber optic pigtail, it's offered in assorted sizes and shapes as per the requirement of various industrial applications. They're extensively used in telecom industry and acknowledged for prime performance and quality. Furthermore, we make sure that our range is free of charge from any defects and well suited for uses. And that we offer the waterproof fiber optic pigtail, they may be produced strictly according to IEC standards, the merchandise feature low insertion loss, high return loss, good interchangeability and repeat push-pull performance, which make them simple to use. The waterproof fiber optic pigtails are with strong jacket and waterproof sealed head connectors; they may be found in harsh environment. If you need some other kinds of patch cables, for example SC fiber cable, LC fiber patch cable, LC to ST fiber cable, ST to SC fiber patch cable, ST fiber patch cable etc. Thanks for visiting we to choose the fiber optic patch cable.
1
Date Submitted Wed. Nov. 6th, 2013 8:21 AM
Revision 1
Scripter applease
Tags cable | connection | fiber | optic | patch | st | to
Comments 0 comments
As the rapid growth and development of network, we create a lot of network application updates and upgrades almost every couple of years. Facing the situation of rising demand, fiber cabling has become the best answer.

There are lots of different parameters indicators to examine the performance of different network media. Copper networks use electrical signals, as the fiber optic networks use optical signals. Whether using electrical signals or optical signals, the insertion loss, return loss, noise and interference would be the main factors affecting network performance. Obviously, the mismatch between joints brought on by the decline in network performance can also be due to the standards mentioned above.

The major characteristics of fiber optic cable, connector, jumper, optical pigtail along with other components are relatively stable in the actual utilisation of the wiring process. Because they are relatively fixed, so the stability of the connections in patch cords (ST to ST fiber patch cable, LC to ST fiber patch cable, etc.) may technically modify the actual fiber optic network. Here¡¯s an analysis and discussion of the optical fiber connection technology in two aspects.

1. Splicing Methods: Fusion splicing has a high rate of success, however the joint after splicing is simpler to break or failure. Under normal circumstances, the splice connection loss could be smaller, generally below 0.2dB, but the return loss is difficult to control, while in the optical fiber fusion process, external factors affecting the quality of lots of splicing, for example environmental conditions, operation of proficiency, the matching of optical fiber. Machine splicing process can¡¯t avoid too large fiber loss for individual reality. Moreover, experience tells us the real lack of worth of splicing must test in order to obtain. In the fiber core under a few more, it is easy to damage, if the test answers are not satisfactory or compliance, to be re-selected after which rework it. Following the network has been utilized , when there is have to slowly move the location to be interrupted fiber optic link, a new position in the re-splicing. The suggestions above could be the emergence of all. Let us pay a lot of splicing work and also the extra care the safety of fiber.

2. Connector Access: People who involved in the manufacture and manufacture of optical products factory colleagues should be fully aware of this. On-site grinding and the factory production are the two can¡¯t compare the way different factory is specialized grinding machine used by the coarse to fine of five grinding process, can¡¯t adjust the pressure field can not be consistent with manual grinding. Maybe previously, the standard low speed network is acceptable, even if there¡¯s excessive insertion loss and return loss, connection instability, etc., since the amount of fiber rich enough to absorb the impact factors. However, in today¡¯s increasingly high end network, a lot of indicators and parameters are extremely sensitive. Because the design requirements or neglect to link effort and time, so the designer or construction are headache, loss occurs beyond the network design requirements, testing such things can¡¯t occur.

In order to solve the optical fiber connection problems might be encountered, so that the design, construction, maintenance and employ of more reliable and stable, the German company has developed the pre-connect technology. According to the actual needs of the scene, the pre-connect technology can pick pre-terminated connectors at each side from the PE or LSZH for indoor or outdoor optical cable. Pre-cable is used for connecting private branch parts. The bare optical fiber cable in the output may become resistant pull, or compression of 3.0/2.0 cable. You¡¯ll be able to eliminate fiber optic network design, construction and employ of various uncertain factors that may cause damage to the fiber optic link or security implications. The entire guarantee system security meets the objective of the design requirements.

Cable connection and installing of pre-construction flow chart with a number of ways of traditional fiber optic terminals compared to pre-connect technology which uses fiber optic directly, that is, pre-terminated fiber cable with no fiber connection point.
0
Date Submitted Tue. Nov. 5th, 2013 4:39 AM
Revision 1
Syntax Master claireling
Tags cable | fiber | LC | MTP | patch | patchcord | st | to
Comments 0 comments
Recently, it is becoming apparent that fiber optic cable is steadily replacing copper wire as an appropriate method of communication signal transmission. They span long distances between local phone systems along with providing the backbone for most network systems. Other system users include cable television services, university campuses, office buildings, industrial plants, and electric utility companies. A fiber-optic method is like the copper wire system that fiber-optics is replacing. For example, fiber patchcord is probably the mostly used components within the fiber optic network.

Fiber patch cable (also known as fiber jumper cable or fiber patchcord) is utilized for connecting one optical device to a different, sometimes with two different connection types. You can find 4 connector types: LC, SC, ST and MTRJ which may be arranged in any configuration to match your connection needs. For example SC fiber cable (SC LC fiber patch cord), LC fiber patch cable (LC to ST fiber cable), ST fiber patch cable (ST to LC fiber patch cable, ST to SC fiber patch cable), ect.

Connector Types:

1. Same connector type fiber patch cable: This fiber optic patch cable has the same kind of connector for both ends, such as ST, SC, LC, FC, MTRJ, E2000, MU, etc.

2. Hybrid fiber optic patch cables: This fiber optic patch cable has different connectors on each side. One end may be SC and the other end could be LC, ST, FC, MTRJ, E2000, MU, etc.

We have to know more information regarding the fiber optic patch cable types, for example, the hybrid fiber optic patch cables, ST to LC fiber patch cable is terminated with LC fiber optic connectors using one end and ST fiber optic connectors however. Called Lucent Connectors, Little Connectors or Local Connectors, these snap-in connectors are generally useful for high density connections and are compatible with plug-and-play devices for example SFP modules and XFP transceivers. Straight Tip ("ST") connectors start using a bayonet-style coupling type, enabling an easy twist-on and twist-off installation. Do not let all of these connectors of different sizes and shapes fool you. Different devices decide on different connector types.

FiberStore provides different types of fiber patch cords including common single-mode 9/125, OM1 62.5/125, OM2 50/125, 10G OM3/OM4 patch cables, armored patch cable, fiber optic pigtails, multi core patch cables, MPO/MTP fiber along with other special patch cables. Should you ever work that will require fiber patch or anything else fiber optic products related and are struggling to discover the products on FiberStore, avoid getting discouraged. Instead, call us or perhaps an email, we are able to support you in finding what you're looking for as well as ensure it is custom.
« Previous 1 2 3 Next »